Tenacious Toys Shop News / action figure

PREORDER Dorohedoro Ebisu Figzero 1/6th Scale Action Figure set by Threezero

PREORDER Dorohedoro Ebisu Figzero 1/6th Scale Action Figure set by Threezero

PREORDER ships Q3 2021

From the manga Dorohedoro, 1/6th scale articulated figure of Ebisu will be available for pre-order on Feb 10, 9am HKT!

The collectible figure stands at approximately 24.5cm tall (excluding the horns on the mask). It features three pieces of interchangeable heads (one masked head with the initial mask design, one masked head with the new mask design, and one bare-faced head), which the original sculpt of Ebisu's bare-faced head is made by Masaki Apsy. The fabric costume includes a sweatshirt, a pair of pants (the attached chevron pieces are made of ABS), and a backpack. Other accessories include one pair of boots, one pair of sickles and two pairs of interchangeable gloved hands (one pair of relaxed hands, one pair of hands for holding sickles). It also comes with her good friend Kikurage (approximately 7cm tall in a sitting pose), which has its neck, arms, and tail articulated. Kikurage can be placed inside the backpack.

Materials: ABS, PVC, POM (costume uses fabric)

Features:
  • 1/6th scale articulated figure, approximately 24.5cm tall (excluding the horns on the mask)
  • Original sculpt of the bare-faced head by Masaki Apsy

Accessories:
  • Interchangeable heads x three pieces (one masked head with the initial mask design, one masked head with the new mask design, one bare-faced head)
  • One Sweatshirt
  • One pair of pants
  • One backpack
  • One pair of boots
  • One pair of sickles
  • Two pairs of interchangeable gloved hands (one pair of relaxed hands, one pair of hands for holding sickles)
  • Kikurage (approximately 7cm tall in a sitting pose / neck, arms, and tail are articulated)
※ Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

©Q-HAYASHIDA/Shogakukan
Read more
PREORDER Transformers: Revenge of the Fallen DLX Optimus Prime 11-inch die cast action figure by ThreeZero

PREORDER Transformers: Revenge of the Fallen DLX Optimus Prime 11-inch die cast action figure by ThreeZero

PREORDER NOW: https://www.tenacioustoys.com/collections/home-featured/products/transformers-revenge-of-the-fallen-dlx-optimus-prime-11-inch-die-cast-action-figure-by-threezero

PREORDER ships Q3 of 2021

Hasbro and threezero are thrilled to present you Optimus Prime from the Transformers: Revenge of the Fallen film as the next figure in the Transformers DLX Collectible Figure Series!

At 11.2 inches (28.4 cm) tall, the Transformers: Revenge of the Fallen – DLX Optimus Prime collectible figure features approximately 57 points of articulation, a die-cast metal frame, and LED illuminated eyes. Accessories include two Ion Blasters, Dual Energon Swords and an Interchangeable Battle Mask and Face, a total of four pairs of interchangeable hands, and a DLX Action Stand for various expressive poses.

Transformers: Revenge of the Fallen – DLX Optimus Prime is designed to be integrated with the DLX Jetfire of the same film (planned for release in Q1 2021). Together, the two figures form the impressive DLX Jetpower Optimus Prime.

DLX Collectible Figures present intricate Transformers designs in a smaller scale with high-fidelity production value. With its unique die-cast metal frame design, DLX not only provides an advanced range of articulation, but also greatly enhances the weight and durability. Together with the detailed and weathered paint application of threezero, a remarkable resemblance is achieved in matching the characters as seen in the original media.

Materials: Die-cast Zinc Alloy, POM, ABS, PVC

Features:

  • Officially Licensed by Hasbro and TakaraTomy
  • Approximately 11.2” (28. 4 cm) tall
  • 57 Points of Articulation
  • Die-cast Metal Parts
  • LED Illuminated Eyes *
  • Part of external armors are detachable for integration purpose with DLX Jetfire


Accessories:

  • One (1) interchangeable Battle Mask and Face
  • Two (2) Ion Blasters
  • Two (2) Dual Energon Swords
  • Four (4) Pairs of Interchangeable Hands: One (1) pair of Fists, one (1) pair of Relaxed Hands, (1) pair of Action Hands, and one (1) pair of hands for holding the Ion Blaster.
  • One (1) Action Stand with Base

* Requires AG13 x2 Batteries (Batteries Not Included)

※ Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

TRANSFORMERS and all related characters are trademarks of Hasbro and are used with permission. ©2020 Hasbro. All Rights Reserved. ©2020 DreamWorks LLC and Paramount Pictures Corporation. All Rights Reserved. Licensed by Hasbro

* IN DEVELOPMENT / NOT FINAL. MAY DIFFER FROM THE FINAL VERSION

Read more
Preorder Avengers Infinity Saga 1/12 scale DLX Iron Man Mark 43 by Threezero

Preorder Avengers Infinity Saga 1/12 scale DLX Iron Man Mark 43 by Threezero

PREORDER ships Q3 2021

threezero proudly presents the DLX Iron Man Mark 43 as the first action figure in the Marvel Studios x threezero Avengers: Infinity Saga series. This fully-articulated 1/12 scale collectible figure stands at 6.5” (~16.5cm) tall and is constructed of threezero’s renown DLX die-cast system with over 48 points of articulation.

Its forearms and upper-torso are detachable which allow the Mark 43 armor to fit inside the Mark 44 Hulkbuster armor to be released in 2021. Attachable arm rockets can be fixed onto both forearms, and two lighting functions are located on the figure; one in the chest and one in the eyes. The two air flaps on the back could be flipped open and close.

The Avengers: Infinity Saga – 1/12 scale DLX Iron Man Mark 43 figure includes two attachable arm rockets; five pairs of interchangeable hands: One pair of fists, one pair of relaxed hands, one pair of shooting hands, one pair of flying hands, and one pair of shooting hands (to assemble the shooting effect); two pairs of effect parts: one pair of shooting effects, and one pair of flying effects (for the feet); and one DLX action stand.

Materials: Die-cast zinc alloy, PVC, ABS, other metals.

Product Details:
  • Approximately 6.5″ (16.5cm) tall articulated figure
  • Over 48 points of articulation
  • Detachable forearms and upper-torso
  • Two (2) air flaps on the back
LED Light-up features: *
  • Eyes
  • Chest
Accessories:
  • Two (2) attachable arm rockets
  • Five (5) pairs of interchangeable hands: One (1) pair of fists, one pair of relaxed hands, one (1) pair of shooting hands, one (1) pair of flying hands, and one (1) pair of shooting hands (to assemble the shooting effect)
  • Two (2) pairs of effect parts: One (1) pair of shooting effects, and one (1) pair of flying effects (for the feet)
  • One (1) DLX action stand.
* Requires AG1 x4 Batteries (Batteries Not Included)

※ In development. Final product may vary from promotional images.
⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

©MARVEL

* IN DEVELOPMENT / NOT FINAL. MAY DIFFER FROM THE FINAL VERSION"
Read more
PREORDER G.I. Joe Storm Shadow 1/6 scale action figure by ThreeZero

PREORDER G.I. Joe Storm Shadow 1/6 scale action figure by ThreeZero

PREORDER ships Q3 of 2021

Hasbro and threezero are thrilled to offer Storm Shadow as the next installment of the G.I. Joe 1/6 scale collection of articulated figures redesigned by threezero as inspired by Hasbro’s retro G.I. Joe characters.

Although he has a conflicted loyalty between the Cobra Organization and G.I. Joe, Storm Shadow is most known as ninja bodyguard for the villainous Cobra Commander and for his shared history and bloodline with Snake Eyes. Highly-trained in Longbow, Katana, and Nunchaku, Storm Shadow moves at lightning speed and is a formidable opponent.

Standing at 12” (30 cm) tall, the 1/6 Storm Shadow collectible figure features threezero’s standard fully-articulated body with realistic seamless arms, fabric hand-tailored costuming, and a high attention to detail. The 1/6 Storm Shadow figure comes with loadout of Accessories including Nunchaku, Recurve Bow, Quivers and Arrows, two Katanas, tactical pouches, and a total of five pairs of interchangeable hands.

Materials:
  • ABS, PC, PVC, and Fabrics
Features:
  • Officially Licensed by Hasbro
  • Approximately 12” tall (~30 cm)
  • 22 Points of Articulation
  • Detailed Storm Shadow masked headsculpt
  • Realistic seamless arms with soft PVC dermis
Costume:
  • Tactical vest with posable fabric hood
  • Bracers
  • Trousers
  • Utility Belt
  • Cross-body Belt
  • Gaiters
  • Boots
Accessories:
  • One (1) Nunchaku
  • One (1) Recurve Bow
  • Two (2) Quivers
  • Two (2) Katanas with Sheathes
  • Three (3) Tactical Pouches
  • Four (4) Arrows
  • Five (5) Pairs of Interchangeable Hands:
    • One (1) pair of Fists,
    • One (1) pair Relaxed,
    • One (1) pair for holding Nunchaku,
    • One (1) pair for holding Katanas, and
    • One (1) pair for holding Bow & Arrows.
※ Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

GI JOE and all related characters are trademarks of Hasbro and are used with permission.
©2020 Hasbro. All Rights Reserved. Licensed by Hasbro.
Read more
PREORDER ROBO-DOU Evangelion Proto Type-00 action figure by Threezero

PREORDER ROBO-DOU Evangelion Proto Type-00 action figure by Threezero

PREORDER ships Q4 2021

From the anime film "Evangelion: New Theatrical Edition", ROBO-DOU Evangelion Proto Type-00'

The ROBO-DOU Evangelion Proto Type-00' collectible is a non-scale articulated figure approximately 25cm (9.8”) tall with a remarkable die-cast main frame that provides 48 points of articulation. The figure is constructed of ABS, PVC, POM, and zinc alloy. Threezero's renown paint application techniques is utilized to highlight all the details.

The ROBO-DOU Evangelion Proto Type-00' collectible figure includes many interactive features to increase playability. The Entry Plug hatch can be opened to reveal the Entry Plug inside, and includes two (2) Entry Plug accessories; both a short Entry Plug for inserted mode, and a long Entry Plug for extracted mode. The figure also comes with an Umbilical Cable which can be attached to a socket in the back of the figure. Its equipment includes a Pallet Rifle and an ESV (Enchanted Shield of Virtue). The figure also includes a variety of interchangeable hands in different poses (a pair of relaxed hands, a pair of open hands, a pair of fists, a pair of hands for holding rifle, and a pair of hands for holding shield) and a ROBO-DOU action stand.

Materials: ABS, PVC, POM, ZINC ALLOY

Features:
  • Approximately 25cm (9.8”) tall articulated figure (non-scale)
  • 48 points of articulation
Accessories:
  • Pallet Rifle
  • ESV (Enchanted Shield of Virtue)
  • Two (2) interchangeable Entry Plugs: Short Entry Plug (for inserted mode), and long Entry Plug (for extracted mode)
  • Umbilical Cable
  • Interchangeable hands: One (1) pair of relaxed hands, one (1) pair of open hands, one (1) pair of fists, one (1) pair of hands for holding rifles, and one (1) pair of hands for holding shield
  • ROBO-DOU action stand
※ Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

©khara
Read more
Preorder Infinity Saga – DLX Iron Man Mark 44 "Hulkbuster" 12-inch action figure by Threezero

Preorder Infinity Saga – DLX Iron Man Mark 44 "Hulkbuster" 12-inch action figure by Threezero

PREORDER SHIPS Q1 2022

Infinity Saga – DLX Iron Man Mark 44 "Hulkbuster"
threezero is excited to announce our second collection from Marvel Studio’s The Infinity Saga series, DLX Iron Man Mark 44 “Hulkbuster” armor. This fully-articulated 1/12 scale collectible figure stands at 11.7” (~30cm) tall and is constructed of threezero’s renowned DLX die-cast system with over 65 points of articulation.

DLX Iron Man Mark 44 “Hulkbuster” armor is specially designed to engage in different poses, particularly the signature landing pose. The exterior chest armor and the head of Mark 44 can be opened and the interior panels can slide apart to insert the torso of the Iron Man Mark 43 [3Z0247] figure inside. Together, the two figures form the impressive Hulkbuster.

DLX Iron Man Mark 44 “Hulkbuster” figure has three lighting functions located on the chest, the back, and the eyes; and features functional forearm armor. It includes three pairs of interchangeable hands: One pair of fists, one pair of relaxed hands, and one pair posed for shooting.

Materials: Die-cast zinc alloy, PVC, ABS, other metals.

Features:
  • Approximately 11.7″ (30cm) tall articulated figure
  • Over 65 points of articulation
  • Exterior chest panel opens and interior panels slide apart to fit the Iron Man Mark 43 [3Z0247] torso inside (not included!!!)
LED Light-up features: *
  • Chest
  • Back
  • Eyes
Accessories:
  • Three (3) pairs of interchangeable hands: One (1) pair of fists, one (1) pair of relaxed hands, one (1) pair of shooting hands.

* Requires AG1 x7 Batteries (Batteries Not Included)
Read more
Rock Gaki 04 P.JAWS 1/6-scale action figure by JT Studio Available Now

Rock Gaki 04 P.JAWS 1/6-scale action figure by JT Studio Available Now

BUY NOW: https://www.tenacioustoys.com/collections/new-in-stock/products/rock-gaki-04-p-jaws-1-6-scale-action-figure-by-jt-studio
Rock Gaki 04 P.JAWS 1/6-scale action figure by JT Studio
  • 1/6 scale action figure
  • limited edition - only 99 pcs made
  • designed and produced by JT Studio of Taiwan
  • battery not included ( AG1x6 )

Due to the outstanding performance of 02 in security, the military are impress by it and during the period of contract between government and Capital Company, they took advantage of it and made their naval unit. Because of 02 traits of high obedience and ability of independent thinking in battlefield to counter attack, the military and Capital Company created 04, aka Aero Shark, the name might sound like an aerial unit, but 04 does not have the ability to perform long distance flight, however it is able to use the jumping method like the flying fish to perform short distance flight to ambush the enemy. Thus 04 body material have been changed to the usage of a special type of metal that is low in weight but high in density, the said metal currently are not announce to public, and we named it temporary as metal “X”.

Like 03, 04 was given the same equipment upgrade. 04s jacket and 03 are same, but 04s have been added a layer of kevlar, to add in the bulletproof effect. This is due to the reason that 04 might encounter situation with hostage, it will allow 04 to give protection to the hostage. As for 04s water board, it had added in an accelerator, it is used to perform sudden burst of speed to perform the earlier mentioned flight.

04 also inherited its predecessors colour scheme, 04 inherited 02 red colour scheme, and due to the mission requirement of 04, 04 also uses the camo design. However in the demand of military to further differentiate the two unit, 04 internal lighting colour have been changed to violet.

Extra note, due to some miscommunication, the supposedly darker tone of 04 was mistakenly made into light pink. But due to the superiority of the performance , the mistake was ignored.

 PS: 我不會告訴你我以前是 BAPE迷。

I will not admit I was fall in love with BAPE before.

*NOTE FROM JT:

This is made by water transfer printing, the pattern of each product will be different, and the more subtle places cannot be printed. If you are concerned about the above problems, please do not buy.

Read more
In Stock Now - GI Joe Super Cyborg COBRA B.A.T Original Edition action figure by Super7

In Stock Now - GI Joe Super Cyborg COBRA B.A.T Original Edition action figure by Super7

BUY NOW: https://www.tenacioustoys.com/collections/new-in-stock/products/gi-joe-super-cyborg-cobra-b-a-t-original-edition-action-figure-by-super7
Super7’s first G.I. Joe figure! Doctor Mindbender’s creation, the Cobra Battle Android Trooper (B.A.T.) looks ready to unleash indiscriminate battlefield mayhem! Along with seven points of articulation, the Super Cyborg Cobra B.A.T. stands 11” tall and features a clear removable torso panel for easy battlefield maintenance- or just to see the inner workings. Your figure will come with a gripper claw, laser cannon, and flamethrower accessories, and will be a fearsome addition to your G.I. Joe collection!

 

Have you ever wondered what made your favorite characters tick? Well, wonder no more! The Super7 Super Cyborg figures will show you exactly what does. Standing at 11’’ tall with multiple articulation points, these awesome action figures features a secret inside. One each figure, the chest and waist panels are removable so you can see the robot inside.

Read more
PREORDER Mighty Morphin Power Rangers 1/6 scale action figure by ThreeZero

PREORDER Mighty Morphin Power Rangers 1/6 scale action figure by ThreeZero

PREORDER ships Q3 2021

Mighty Morphin Power Rangers – 1/6 Scale Collectible Figures

A team of legendary rangers no one can ever beat! Go Go Power Rangers!!!


From the American superhero television series, Mighty Morphin Power Rangers, threezero and Hasbro are proud to present 1/6th scale articulated figures based on the classic original series. These figures are only available in selected markets.


The Mighty Morphin Power Rangers are approximately 12” (30cm) tall, fully-articulated collectible figures with hand-tailored fabric costumes, standard boots, and unique Mighty Morphin helmet. Each Power Ranger figure includes a utility belt, Blade Blaster holster, Blade Blaster, individual weapons, and four (4) pairs of interchangeable hands.


The Power Rangers’ individual weapons may also be integrated into the Power Blaster by combining the Power Sword, Power Bow, Power Axe, Power Daggers, and Power Lance accessories; included separately with the core five (5) Power Rangers figures. This powerful assembled weapon is used as a finisher on small monsters.

Materials: PVC, ABS, fabric & POM

Features:
  • Officially licensed by Hasbro
  • Approximately 12″ (30cm) tall
  • Fully-articulated collectible figure
  • 34 Points of Articulation
  • Hand-tailored fabric clothing
Costume:
  • One (1) Mighty Morphin helmet
  • One (1) fabric outfit
  • One (1) utility belt
  • One (1) Blade Blaster holster
  • One (1) pair of boots
  • Four (4) Pairs of Interchangeable Hands: One (1) pair of Fists, one (1) pair Relaxed, one (1) pair for holding Melee Weapons, and one (1) pair for holding Firearms.
Accessories:

Mighty Morphin Power Rangers — 1/6 Black Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • One (1) Power Axe
Mighty Morphin Power Rangers — 1/6 Blue Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • One (1) Power Lance (can split into a pair of trident-shaped blades)
Mighty Morphin Power Rangers — 1/6 Green Ranger
  • One (1) Dragon Shield
  • One (1) Dragon Dagger
  • One (1) Sword of Darkness
Mighty Morphin Power Rangers — 1/6 Pink Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • One (1) Power Bow
Mighty Morphin Power Rangers — 1/6 Red Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • One (1) Power Sword
Mighty Morphin Power Rangers — 1/6 Yellow Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • Two (2) Power Daggers
Read more
PREORDER GAKI RACE #0 Zaiki 1/6 scale action figure set by JT Studio

PREORDER GAKI RACE #0 Zaiki 1/6 scale action figure set by JT Studio

BUY NOW: https://www.tenacioustoys.com/products/gaki-race-0-zaiki-1-6-scale-action-figure-set-by-jt-studio
PREORDER ships Q2 2022

The world are dominated by three realms - Heaven, Mortal, Hell, with the three realms performing their duty, it forms the basis of day and night. Among them, [Hell] is the realm that makes humans tremble in fear, the sins they did in their life are being accounted for here….
In hell, the soul's sins and desire are refined into Soul Energy , other than being the currency of demons, it can be consumed by them to strengthen their power. The demon that became victor of Hell's annual event Hell Racing, are granted a part of the years' worth of Soul Energy.


The Bastard Son of Satan - Zaiki, plan to change [Hell Racing] rules to his own liking, and make it into unrestricted Brawl [GakiRace]. But, will the elite demons allow Zaiki to destroy the tradition of Hell Racing?

Zaiki, the son of Satan and inherited the enormous power from his father, had never been to the outside world. Although possesses the formidable ability, his interests are stealing Soul Energy and causing chaos.

After stealing plenty of novelties from Mortal, Zaiki, who just returned to Hell, remodeled the grabbed motorcycle into GOIMP immediately. Next, he plans to change the tradition of Hell Racing, and make it into unrestricted brawl Gaki Race.

1/6 Figure size : H29cm

• 1/6 GOIMP Motor size : L23xH6.5xW9cm
• Limit 399 Sets
• Approx Shipping Period: Q1-Q2, 2022
• FREE global shipping (Fedex, DHL or USPS according to availability and our choice)

No cancellations of preorders, no refunds. Yes this will take over a year to produce and ship. Use one of our payment plans!

This picture only supplies the prototype reference, actual product may vary slightly
Read more
Preorder Journey to the Street PIG 8” 2GO action figure by JT Studio

Preorder Journey to the Street PIG 8” 2GO action figure by JT Studio

PREORDER NOW: https://www.tenacioustoys.com/products/journey-to-the-street-pig-8-2go-action-figure-by-jt-studio

PREORDER ships Q2 of 2022 (June 2022)

8”2 GO - JOURNEY TO THE STREET - SHA

“V monster Skateboarding Competition”- the annual feast which plenty of monsters gathering together to participate.

Sun, Pig, Sha, Tang are commissioned to win the biggest prize - Skateboarding Bible.
The concept of 8”2GO series is designed for collectors to carry figures with them.
Therefore, each character will be equipped with a 1:1 carrying bag. The figure and the skateboard are located in different layers to avoid scratches. Meanwhile, you can hang the bag directly on your body by the attached strap.

The proportion of 8” 2GO series is 1/6, the height of 10-12 years old children, about 8 inches(21~23cm). The body has 24 movable joints.

Includes:

  • Figure x1
  • Skateboard x1
  • Bag for figure x1
  • Bag for you (1:1 size) x1
Read more
Preorder Journey to the Street SHA 8” 2GO action figure by JT Studio

Preorder Journey to the Street SHA 8” 2GO action figure by JT Studio

PREORDER NOW: https://www.tenacioustoys.com/products/journey-to-the-street-sha-8-2go-action-figure-by-jt-studio

PREORDER ships Q2 of 2022 (June 2022)

8”2 GO - JOURNEY TO THE STREET - SHA

“V monster Skateboarding Competition”- the annual feast which plenty of monsters gathering together to participate.

Sun, Pig, Sha, Tang are commissioned to win the biggest prize - Skateboarding Bible.
The concept of 8”2GO series is designed for collectors to carry figures with them.
Therefore, each character will be equipped with a 1:1 carrying bag. The figure and the skateboard are located in different layers to avoid scratches. Meanwhile, you can hang the bag directly on your body by the attached strap.

The proportion of 8” 2GO series is 1/6, the height of 10-12 years old children, about 8 inches(21~23cm). The body has 24 movable joints.

Includes:

  • Figure x1
  • Skateboard x1
  • Bag for figure x1
  • Bag for you (1:1 size) x1
Read more
323 results