Tenacious Toys Shop News / articulated

PREORDER Dorohedoro Ebisu Figzero 1/6th Scale Action Figure set by Threezero

PREORDER Dorohedoro Ebisu Figzero 1/6th Scale Action Figure set by Threezero

PREORDER ships Q3 2021

From the manga Dorohedoro, 1/6th scale articulated figure of Ebisu will be available for pre-order on Feb 10, 9am HKT!

The collectible figure stands at approximately 24.5cm tall (excluding the horns on the mask). It features three pieces of interchangeable heads (one masked head with the initial mask design, one masked head with the new mask design, and one bare-faced head), which the original sculpt of Ebisu's bare-faced head is made by Masaki Apsy. The fabric costume includes a sweatshirt, a pair of pants (the attached chevron pieces are made of ABS), and a backpack. Other accessories include one pair of boots, one pair of sickles and two pairs of interchangeable gloved hands (one pair of relaxed hands, one pair of hands for holding sickles). It also comes with her good friend Kikurage (approximately 7cm tall in a sitting pose), which has its neck, arms, and tail articulated. Kikurage can be placed inside the backpack.

Materials: ABS, PVC, POM (costume uses fabric)

Features:
  • 1/6th scale articulated figure, approximately 24.5cm tall (excluding the horns on the mask)
  • Original sculpt of the bare-faced head by Masaki Apsy

Accessories:
  • Interchangeable heads x three pieces (one masked head with the initial mask design, one masked head with the new mask design, one bare-faced head)
  • One Sweatshirt
  • One pair of pants
  • One backpack
  • One pair of boots
  • One pair of sickles
  • Two pairs of interchangeable gloved hands (one pair of relaxed hands, one pair of hands for holding sickles)
  • Kikurage (approximately 7cm tall in a sitting pose / neck, arms, and tail are articulated)
※ Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

©Q-HAYASHIDA/Shogakukan
Read more
PREORDER Transformers: Revenge of the Fallen DLX Optimus Prime 11-inch die cast action figure by ThreeZero

PREORDER Transformers: Revenge of the Fallen DLX Optimus Prime 11-inch die cast action figure by ThreeZero

PREORDER NOW: https://www.tenacioustoys.com/collections/home-featured/products/transformers-revenge-of-the-fallen-dlx-optimus-prime-11-inch-die-cast-action-figure-by-threezero

PREORDER ships Q3 of 2021

Hasbro and threezero are thrilled to present you Optimus Prime from the Transformers: Revenge of the Fallen film as the next figure in the Transformers DLX Collectible Figure Series!

At 11.2 inches (28.4 cm) tall, the Transformers: Revenge of the Fallen – DLX Optimus Prime collectible figure features approximately 57 points of articulation, a die-cast metal frame, and LED illuminated eyes. Accessories include two Ion Blasters, Dual Energon Swords and an Interchangeable Battle Mask and Face, a total of four pairs of interchangeable hands, and a DLX Action Stand for various expressive poses.

Transformers: Revenge of the Fallen – DLX Optimus Prime is designed to be integrated with the DLX Jetfire of the same film (planned for release in Q1 2021). Together, the two figures form the impressive DLX Jetpower Optimus Prime.

DLX Collectible Figures present intricate Transformers designs in a smaller scale with high-fidelity production value. With its unique die-cast metal frame design, DLX not only provides an advanced range of articulation, but also greatly enhances the weight and durability. Together with the detailed and weathered paint application of threezero, a remarkable resemblance is achieved in matching the characters as seen in the original media.

Materials: Die-cast Zinc Alloy, POM, ABS, PVC

Features:

  • Officially Licensed by Hasbro and TakaraTomy
  • Approximately 11.2” (28. 4 cm) tall
  • 57 Points of Articulation
  • Die-cast Metal Parts
  • LED Illuminated Eyes *
  • Part of external armors are detachable for integration purpose with DLX Jetfire


Accessories:

  • One (1) interchangeable Battle Mask and Face
  • Two (2) Ion Blasters
  • Two (2) Dual Energon Swords
  • Four (4) Pairs of Interchangeable Hands: One (1) pair of Fists, one (1) pair of Relaxed Hands, (1) pair of Action Hands, and one (1) pair of hands for holding the Ion Blaster.
  • One (1) Action Stand with Base

* Requires AG13 x2 Batteries (Batteries Not Included)

※ Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

TRANSFORMERS and all related characters are trademarks of Hasbro and are used with permission. ©2020 Hasbro. All Rights Reserved. ©2020 DreamWorks LLC and Paramount Pictures Corporation. All Rights Reserved. Licensed by Hasbro

* IN DEVELOPMENT / NOT FINAL. MAY DIFFER FROM THE FINAL VERSION

Read more
Preorder Avengers Infinity Saga 1/12 scale DLX Iron Man Mark 43 by Threezero

Preorder Avengers Infinity Saga 1/12 scale DLX Iron Man Mark 43 by Threezero

PREORDER ships Q3 2021

threezero proudly presents the DLX Iron Man Mark 43 as the first action figure in the Marvel Studios x threezero Avengers: Infinity Saga series. This fully-articulated 1/12 scale collectible figure stands at 6.5” (~16.5cm) tall and is constructed of threezero’s renown DLX die-cast system with over 48 points of articulation.

Its forearms and upper-torso are detachable which allow the Mark 43 armor to fit inside the Mark 44 Hulkbuster armor to be released in 2021. Attachable arm rockets can be fixed onto both forearms, and two lighting functions are located on the figure; one in the chest and one in the eyes. The two air flaps on the back could be flipped open and close.

The Avengers: Infinity Saga – 1/12 scale DLX Iron Man Mark 43 figure includes two attachable arm rockets; five pairs of interchangeable hands: One pair of fists, one pair of relaxed hands, one pair of shooting hands, one pair of flying hands, and one pair of shooting hands (to assemble the shooting effect); two pairs of effect parts: one pair of shooting effects, and one pair of flying effects (for the feet); and one DLX action stand.

Materials: Die-cast zinc alloy, PVC, ABS, other metals.

Product Details:
  • Approximately 6.5″ (16.5cm) tall articulated figure
  • Over 48 points of articulation
  • Detachable forearms and upper-torso
  • Two (2) air flaps on the back
LED Light-up features: *
  • Eyes
  • Chest
Accessories:
  • Two (2) attachable arm rockets
  • Five (5) pairs of interchangeable hands: One (1) pair of fists, one pair of relaxed hands, one (1) pair of shooting hands, one (1) pair of flying hands, and one (1) pair of shooting hands (to assemble the shooting effect)
  • Two (2) pairs of effect parts: One (1) pair of shooting effects, and one (1) pair of flying effects (for the feet)
  • One (1) DLX action stand.
* Requires AG1 x4 Batteries (Batteries Not Included)

※ In development. Final product may vary from promotional images.
⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

©MARVEL

* IN DEVELOPMENT / NOT FINAL. MAY DIFFER FROM THE FINAL VERSION"
Read more
PREORDER G.I. Joe Storm Shadow 1/6 scale action figure by ThreeZero

PREORDER G.I. Joe Storm Shadow 1/6 scale action figure by ThreeZero

PREORDER ships Q3 of 2021

Hasbro and threezero are thrilled to offer Storm Shadow as the next installment of the G.I. Joe 1/6 scale collection of articulated figures redesigned by threezero as inspired by Hasbro’s retro G.I. Joe characters.

Although he has a conflicted loyalty between the Cobra Organization and G.I. Joe, Storm Shadow is most known as ninja bodyguard for the villainous Cobra Commander and for his shared history and bloodline with Snake Eyes. Highly-trained in Longbow, Katana, and Nunchaku, Storm Shadow moves at lightning speed and is a formidable opponent.

Standing at 12” (30 cm) tall, the 1/6 Storm Shadow collectible figure features threezero’s standard fully-articulated body with realistic seamless arms, fabric hand-tailored costuming, and a high attention to detail. The 1/6 Storm Shadow figure comes with loadout of Accessories including Nunchaku, Recurve Bow, Quivers and Arrows, two Katanas, tactical pouches, and a total of five pairs of interchangeable hands.

Materials:
  • ABS, PC, PVC, and Fabrics
Features:
  • Officially Licensed by Hasbro
  • Approximately 12” tall (~30 cm)
  • 22 Points of Articulation
  • Detailed Storm Shadow masked headsculpt
  • Realistic seamless arms with soft PVC dermis
Costume:
  • Tactical vest with posable fabric hood
  • Bracers
  • Trousers
  • Utility Belt
  • Cross-body Belt
  • Gaiters
  • Boots
Accessories:
  • One (1) Nunchaku
  • One (1) Recurve Bow
  • Two (2) Quivers
  • Two (2) Katanas with Sheathes
  • Three (3) Tactical Pouches
  • Four (4) Arrows
  • Five (5) Pairs of Interchangeable Hands:
    • One (1) pair of Fists,
    • One (1) pair Relaxed,
    • One (1) pair for holding Nunchaku,
    • One (1) pair for holding Katanas, and
    • One (1) pair for holding Bow & Arrows.
※ Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

GI JOE and all related characters are trademarks of Hasbro and are used with permission.
©2020 Hasbro. All Rights Reserved. Licensed by Hasbro.
Read more
Preorder Infinity Saga – DLX Iron Man Mark 44 "Hulkbuster" 12-inch action figure by Threezero

Preorder Infinity Saga – DLX Iron Man Mark 44 "Hulkbuster" 12-inch action figure by Threezero

PREORDER SHIPS Q1 2022

Infinity Saga – DLX Iron Man Mark 44 "Hulkbuster"
threezero is excited to announce our second collection from Marvel Studio’s The Infinity Saga series, DLX Iron Man Mark 44 “Hulkbuster” armor. This fully-articulated 1/12 scale collectible figure stands at 11.7” (~30cm) tall and is constructed of threezero’s renowned DLX die-cast system with over 65 points of articulation.

DLX Iron Man Mark 44 “Hulkbuster” armor is specially designed to engage in different poses, particularly the signature landing pose. The exterior chest armor and the head of Mark 44 can be opened and the interior panels can slide apart to insert the torso of the Iron Man Mark 43 [3Z0247] figure inside. Together, the two figures form the impressive Hulkbuster.

DLX Iron Man Mark 44 “Hulkbuster” figure has three lighting functions located on the chest, the back, and the eyes; and features functional forearm armor. It includes three pairs of interchangeable hands: One pair of fists, one pair of relaxed hands, and one pair posed for shooting.

Materials: Die-cast zinc alloy, PVC, ABS, other metals.

Features:
  • Approximately 11.7″ (30cm) tall articulated figure
  • Over 65 points of articulation
  • Exterior chest panel opens and interior panels slide apart to fit the Iron Man Mark 43 [3Z0247] torso inside (not included!!!)
LED Light-up features: *
  • Chest
  • Back
  • Eyes
Accessories:
  • Three (3) pairs of interchangeable hands: One (1) pair of fists, one (1) pair of relaxed hands, one (1) pair of shooting hands.

* Requires AG1 x7 Batteries (Batteries Not Included)
Read more
Boo Berry Skull Dangler Blue GID 8" vinyl figure by DuBose Art Available Now

Boo Berry Skull Dangler Blue GID 8" vinyl figure by DuBose Art Available Now

BUY NOW: https://www.tenacioustoys.com/products/skull-dangler-blue-gid-8-inch-vinyl-figure-by-dubose-art

The Vinyl Skull Dangler is here!! He measures 8in tall, adorned with various plague-bearing creature skulls, ranging from ducks, herrings, primates and even human..okay a lot of human!

Blank Vinyl in a Tenacious Exclusive blue GID we are calling Boo Berry!

  • Limited to just 30 in this awesome color.
  • These are factory made Blue GID Vinyl.
  • 3 points of articulation.
  • Comes with exclusive sticker.

Special blue Ooze Head accessory available separately over in the DuBose Art shop (we don't have those!)

Read more
PREORDER Mighty Morphin Power Rangers 1/6 scale action figure by ThreeZero

PREORDER Mighty Morphin Power Rangers 1/6 scale action figure by ThreeZero

PREORDER ships Q3 2021

Mighty Morphin Power Rangers – 1/6 Scale Collectible Figures

A team of legendary rangers no one can ever beat! Go Go Power Rangers!!!


From the American superhero television series, Mighty Morphin Power Rangers, threezero and Hasbro are proud to present 1/6th scale articulated figures based on the classic original series. These figures are only available in selected markets.


The Mighty Morphin Power Rangers are approximately 12” (30cm) tall, fully-articulated collectible figures with hand-tailored fabric costumes, standard boots, and unique Mighty Morphin helmet. Each Power Ranger figure includes a utility belt, Blade Blaster holster, Blade Blaster, individual weapons, and four (4) pairs of interchangeable hands.


The Power Rangers’ individual weapons may also be integrated into the Power Blaster by combining the Power Sword, Power Bow, Power Axe, Power Daggers, and Power Lance accessories; included separately with the core five (5) Power Rangers figures. This powerful assembled weapon is used as a finisher on small monsters.

Materials: PVC, ABS, fabric & POM

Features:
  • Officially licensed by Hasbro
  • Approximately 12″ (30cm) tall
  • Fully-articulated collectible figure
  • 34 Points of Articulation
  • Hand-tailored fabric clothing
Costume:
  • One (1) Mighty Morphin helmet
  • One (1) fabric outfit
  • One (1) utility belt
  • One (1) Blade Blaster holster
  • One (1) pair of boots
  • Four (4) Pairs of Interchangeable Hands: One (1) pair of Fists, one (1) pair Relaxed, one (1) pair for holding Melee Weapons, and one (1) pair for holding Firearms.
Accessories:

Mighty Morphin Power Rangers — 1/6 Black Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • One (1) Power Axe
Mighty Morphin Power Rangers — 1/6 Blue Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • One (1) Power Lance (can split into a pair of trident-shaped blades)
Mighty Morphin Power Rangers — 1/6 Green Ranger
  • One (1) Dragon Shield
  • One (1) Dragon Dagger
  • One (1) Sword of Darkness
Mighty Morphin Power Rangers — 1/6 Pink Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • One (1) Power Bow
Mighty Morphin Power Rangers — 1/6 Red Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • One (1) Power Sword
Mighty Morphin Power Rangers — 1/6 Yellow Ranger
  • One (1) Blade Blaster (can convert into blade or sidearm form)
  • Two (2) Power Daggers
Read more
Army Of Darkness ReAction Figure Pit Witch GID SDCC Edition by Super7 Available Now

Army Of Darkness ReAction Figure Pit Witch GID SDCC Edition by Super7 Available Now

BUY NOW: https://www.tenacioustoys.com/collections/new-in-stock/products/army-of-darkness-reaction-figure-pit-witch-gid-sdcc-edition-by-super7
SDCC 2021 EXCLUSIVE

From Super7 comes the newest figure to the ReAction figure line, Pit Witch (Glow-in-the-Dark)! Based on the classic Army of Darkness movie by Benny's cousin Sam, this figure stands 3.75 inches tall and features five points of articulation.

  • 3.75 inches (9.52cm)
  • Made of plastic
  • Glow-in-the-Dark version
  • Retro figure design
  • Blister card packaging
  • Full figure card art
  • 5 Points of articulation
  • SDCC 2021 Exclusive
Read more
Garbage Pail Kids ReAction Figure Adam Bomb Red SDCC Edition by Super7 Available Now

Garbage Pail Kids ReAction Figure Adam Bomb Red SDCC Edition by Super7 Available Now

BUY NOW: https://www.tenacioustoys.com/collections/new-in-stock/products/garbage-pail-kids-reaction-figure-adam-bomb-red-sdcc-edition-by-super7
SDCC 2021 EXCLUSIVE

From Super7, Adam Bomb continues their ReAction retro figure line. Based on the Garbage Pail Kids, the Adam Bomb (Red Ver.) ReAction figure stands 3.75 inches tall and includes five points of articulation.

  • 3.75 inches (9.52cm)
  • Made of plastic
  • Retro figure design
  • Blister card packaging
  • Full figure card art
  • 5 Points of articulation
  • Red version
  • SDCC 2021 Exclusive
Read more
Army Of Darkness ReAction Figure Deadite Scout GID SDCC Edition by Super7 Available Now

Army Of Darkness ReAction Figure Deadite Scout GID SDCC Edition by Super7 Available Now

BUY NOW: https://www.tenacioustoys.com/collections/new-in-stock/products/army-of-darkness-reaction-figure-deadite-scout-gid-sdcc-edition-by-super7
SDCC 2021 EXCLUSIVE

From Super7, comes the newest figure to the ReAction figure line, Deadite Scout (Glow-in-the-Dark)! Based on the classic Army of Darkness movie by Benny's cousin Sam, this figure stands 3.75 inches tall and features five points of articulation.

  • 3.75 inches (9.52cm)
  • Made of plastic
  • Glow-in-the-Dark version
  • Retro figure design
  • Blister card packaging
  • Full figure card art
  • 5 Points of articulation
  • SDCC 2021 Exclusive
Read more
Preorder Journey to the Street PIG 8” 2GO action figure by JT Studio

Preorder Journey to the Street PIG 8” 2GO action figure by JT Studio

PREORDER NOW: https://www.tenacioustoys.com/products/journey-to-the-street-pig-8-2go-action-figure-by-jt-studio

PREORDER ships Q2 of 2022 (June 2022)

8”2 GO - JOURNEY TO THE STREET - SHA

“V monster Skateboarding Competition”- the annual feast which plenty of monsters gathering together to participate.

Sun, Pig, Sha, Tang are commissioned to win the biggest prize - Skateboarding Bible.
The concept of 8”2GO series is designed for collectors to carry figures with them.
Therefore, each character will be equipped with a 1:1 carrying bag. The figure and the skateboard are located in different layers to avoid scratches. Meanwhile, you can hang the bag directly on your body by the attached strap.

The proportion of 8” 2GO series is 1/6, the height of 10-12 years old children, about 8 inches(21~23cm). The body has 24 movable joints.

Includes:

  • Figure x1
  • Skateboard x1
  • Bag for figure x1
  • Bag for you (1:1 size) x1
Read more
Preorder Journey to the Street SHA 8” 2GO action figure by JT Studio

Preorder Journey to the Street SHA 8” 2GO action figure by JT Studio

PREORDER NOW: https://www.tenacioustoys.com/products/journey-to-the-street-sha-8-2go-action-figure-by-jt-studio

PREORDER ships Q2 of 2022 (June 2022)

8”2 GO - JOURNEY TO THE STREET - SHA

“V monster Skateboarding Competition”- the annual feast which plenty of monsters gathering together to participate.

Sun, Pig, Sha, Tang are commissioned to win the biggest prize - Skateboarding Bible.
The concept of 8”2GO series is designed for collectors to carry figures with them.
Therefore, each character will be equipped with a 1:1 carrying bag. The figure and the skateboard are located in different layers to avoid scratches. Meanwhile, you can hang the bag directly on your body by the attached strap.

The proportion of 8” 2GO series is 1/6, the height of 10-12 years old children, about 8 inches(21~23cm). The body has 24 movable joints.

Includes:

  • Figure x1
  • Skateboard x1
  • Bag for figure x1
  • Bag for you (1:1 size) x1
Read more
314 results